TOLSEN TOOLS Force Xpress 79575 Instruction Manual
  1. Manuals
  2. Brands
  3. TOLSEN TOOLS Manuals
  4. Pressure Washer
  5. Force Xpress 79575
  6. Instruction manual

TOLSEN TOOLS Force Xpress 79575 Instruction Manual

230v/50hz, 2000w
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
79575
HIGH PRESSURE WASHER
INSTRUCTION MANUAL
SAVE THIS MANUAL !
You will need this manual for safety instructions, operating procedures and warranty.
Put it and the original sales receipt in a safe dry place for future reference.
230V/50Hz
2000W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Force Xpress 79575 and is the answer not in the manual?

Questions and answers

Related Manuals for TOLSEN TOOLS Force Xpress 79575

Summary of Contents for TOLSEN TOOLS Force Xpress 79575

  • Page 1 79575 HIGH PRESSURE WASHER INSTRUCTION MANUAL 230V/50Hz 2000W SAVE THIS MANUAL ! You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.

  • Page 2: Important Safety Information

    SAFETY IMPORTANT SAFETY INFORMATION Safety Instructions 1. The appliance has been designed solely for private use outdoors and not for commercial use. Keep this appliance away from heat, direct sunlight, moisture and rain, ice and sharp edges. 2. Do not allow anybody that has not been trained to use a pressure washer to operate the machine without first reading the instruction manual.
  • Page 3 SAFETY 23. WARNING: Inadequate extension cables may be dangerous. Cables and spools must always be completely unwound to avoid letting the cable overheat. 24. If an extension cable is used, the plug and socket must be waterproof and conform to the requirements below regarding the length and dimensions of the cable.

  • Page 4: Technical Data

    SETUP AND SPECIFICATIONS SETUP AND SPECIFICATIONS Technical data Max. pressure 140bar/2030pis Flow 5.5l/min power 2000W Voltage 230V~50Hz Water temperature 5~60℃ 1. Main ON/OFF switch 6. High-pressure hose 2. High-pressure outlet 7. Gun safe lock 3. Water connection with filter 8. Power plug 4.

  • Page 5: Connection Of Garden Hose

    SETUP AND SPECIFICATIONS Connection of garden hose Screw the water inlet coupling (1) tight on to the water inlet Note: The inlet filter (A) must always be fitted in the water inlet pipe to filter out sand, lime stone and other impurities as these will damage the pump valves.

  • Page 6: Start/Stop Of The Machine

    SETUP AND SPECIFICATIONS Start/stop of the machine The trigger gun and lance is affected by a thrust during operation - therefore always hold it firmly with both hands. IMPORTANT: Point the nozzle at the ground. Check that the machine is in upright position. NOTE: Do not place the machine in high grass! Release the trigger lock .

  • Page 7: Environmental Protection

    SETUP AND SPECIFICATIONS Environmental protection Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Please dispose your old appliances using appropriate collection systems. Maintenance, cleaner and repair WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice: Wash out water hose, high pressure hose, spray lance and accessories before mounting.
  • Page 8 The machine will The machine is not plugged-in Plug the machine in not start Faulty receptacle Try another receptacle The fuse has blown Replace the fuse Unplug other Faulty extension cable appliances Try without the extension cable Fluctuating pressure The pump is drawing in air Check that hoses and connections are airtight.
  • Page 9 ASSEMBLY DIAGRAM (MACHINE)

  • Page 10: Parts List

    PARTS LIST PARTS LIST (MACHINE) Tapping screw Le machine body 4 corners of gasket filter connector gastket O-ring water inlet connector quick connector quick connector gastket Top cover soket head cap screw Flat gasket right machine body tension disc Pump Rubber front pad...
  • Page 11 ASSEMBLY DIAGRAM PART-B (PUMP)
  • Page 12 PARTS LIST PARTS LIST PART-B (PUMP) soket head cap screw Cross element machine screw spring shim Cross flat - ended spindle screw water inlet connector Switch box cover Triangle ring High and low screw K1200 one way valve seat main switch o-ring Waterproof cover pressing plate one way valve core...
  • Page 13 NOTE...
  • Page 14 NOTE...
  • Page 15 NOTE...
  • Page 16 TOLSEN TOOLS CO.,LIMITED www.tolsentools.com TOLSEN is a trademark or registered trademark of TOLSEN TOOLS. All rights reserved. MADE IN CHINA...

Table of Contents