Adding Detergent; Combination Detergent - Siemens SN678D16TC Instruction Manual

Adding detergent

If the detergent dispenser 9: is still
1.
closed, actuate locking bar 9B to
open it.
Pour detergent into the dry detergent
2.
dispenser 9: only (insert tablet flat,
not on its edge).
Dosage: see manufacturer's
3.
instructions on the packaging. Use
graduated detergent dispenser.
Usually 20 ml–25 ml are adequate
for normal soiling. If using tablets,
one tablet is adequate.
Close cover on the detergent
4.
dispenser.
Cover "clicks" into position.
The detergent dispenser opens
automatically at the optimum time
depending on the programme. The
powder or liquid detergent is
distributed in the appliance and is
dissolved, the tablet falls into the
tablet collecting tray where it
dissolves in doses.
If the utensils are only lightly
Tip:
soiled, slightly less than the indicated
amount of detergent is usually
adequate.
Suitable detergents and care products
can be purchased online via our
website or via customer service (see
back page).

Combination detergent

Apart from conventional detergents
(Solo), a number of products are offered
with additional functions. These
products contain not only the detergent
but also rinse-aid and salt replacement
substances (3in1) and, depending on
the combination (4in1, 5in1, ...),
additional components such as glass
protection or stainless steel cleaner.
Combination detergents function only
up to a specific degree of hardness
(usually 21°dH). Over this limit salt and
rinse-aid must be added.
As soon as combined detergents are
used, the rinse programme is adjusted
automatically to ensure the best
possible rinsing and drying result.
Detergent en
33