Page 1
Assembly instructions The VESA spacer is compatible with all 75x75mm VESA monitors. The spacer creates a distance of 30mm to your monitor. This adapter makes it possible to use VESA holes that are otherwise difficult or impossible to access.
Assembly instructions Important Safeguards Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.
For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area. 4. Manufacturer Information 3idee Technologies S.à r.l. 5 Um Lenster Bierg L-6125 Junglinster Luxembourg 5.
Assembly instructions Horizontal / Vertical Alignment Not all VESA adapters and monitors are suitable for vertical alignment. (upright) This is due to the geometry of the adapter / monitor, which in some cases cannot be achieved in any other way. We would like to point out that this information should not be disregarded under any circumstances, as the adapter will very quickly reach its durability limit if it is not mounted as specified.
Assembly instructions Assembly Instruction Step 1 Screw the spacer between your monitor and your monitor arm / VESA mount as shown. (Figure 1) Figure 1...