Electrical cables and hoses should be checked for any signs of damage before starting the unit. Ensure a spill kit is available in case of any accidental spills. Used filters must be disposed of in accordance with local environmental requirements. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR Tel: +44 (0)115 9003 600...
Basic Description The DFT-1 portable filtration unit is a compact, self-contained filtration system, equipped with a high efficiency, high capacity filter cell capable of removing particulate contaminants and/or water quickly, conveniently and economically. It is designed for on-site preventative maintenance and is fitted with two standpipes and hoses for efficient fluid transfer.
If for any reason the power supply cuts out, the internal contactor will unlatch to prevent accidental spillage once power is restored. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR...
Indicates the filter is now fully blocked and requires changing The filter cell housing is monitored by a visual differential pressure indicator, displaying the filter’s condition via a green, yellow and red traffic light system. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR Tel:...
Removal of ferromagnetic material can be carried out using a suitable tool as shown above (Filtertechnik part number FT-RRT01). The tool is to be located at the top of the magnet and downward force applied to push the material off the magnet.
Once all the air has been removed make sure the sampling / vent tube is disconnected to prevent siphoning or spillage of fluid. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR Tel:...
The upper port will provide pre-filtration sampling, while the lower port will provide post-filtration sampling. Alternatively an FS9001 fuel & oil cleanliness monitor can be attached to these ports for providing real-time instant readings of fuel cleanliness. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR Tel: +44 (0)115 9003 600...
Isolation valves are fitted to the inlet and outlet ports. These should be closed off when the system is not in use, or when filter cells are being changed out. It is also advisable to cap off ends of the pipework to prevent contaminants from entering the system. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR Tel:...
The suction strainer will periodically need cleaning by unscrewing the cap, removing the mesh strainer and cleaning this out with a fluid suited for the units intended purpose e.g. hydraulic oil. Filtertechnik 1 Central Park, Lenton Lane, Nottingham, NG7 2NR...
Limited Express Warranties, and no others: For a period of one (1) year from and after the date of delivery of a new Filtertechnik product, Filtertechnik warrants and guarantees only to the original purchaser/user that such a product shall be free from defects of materials and workmanship in the manufacturing process.
Need help?
Do you have a question about the DFT-1 and is the answer not in the manual?
Questions and answers