Advertisement
Tape Operation
Special VCR Features
Repeat Play
Set to playback a recording over and over.
Press ACTION'
to display menu.
2 EA)
| Press AV
AUTO SHUT-OFF, ON
to select REPEAT
Von's OUTPUT cH D
PLAY and press P to
set ON or OFF.
* Play repeats at tape
end or if unrecorded
portion over 30 sec.
is detected.
SELECTA
Y
SET:
EXIT__ ¡ACTION
Press ACTION
to return to normal screen.
To quickly return to a specified tape location.
Press DISPLAY during play
to display Counter.
Press RESET
COUNTER
at
desired position
to reset to "0:00:00".
3 Continue to record, playback, etc.
4 Press Stop.
5
Press CM/ZERO
in Stop mode
to stat ZERO
SEARCH.
* Unit will go into FF
or REW mode and
stop at the last point
the Counter was set
to 0:00:00.
* lf a blank portion exists on the
tape, and depending on the position
of the V mark, the V mark display
position may not be accurate.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to :
Tape Position Display Feature
To find out the present tape position.
Tape position cannot be detected for VHS-C
Cassette type and tapes less than 60 minutes
in length.
Press TAPE POSITION
to detect tape position.
e "DETECTING
TAPE
POSITION"
onl
| DETECTING TAPE POSITION J
appears the first time
Y
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
e The present tape
pe i a
position indication is
displayed.
Press TAPE POSITION
to return to normal screen.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 16), and this
feature is set to on, a warning appears whenever
an invalid key is pressed in TV mode.
Press ACTION
to display menu.
Press AV
to select REMOTE
WARNING and press >
to set ON or OFF.
[Len 1 COCK] CHANNEL]
AEPEAT
PLAY
¿OFF
REMOTE
WARNING
On
AO
SHUT-OFF
:ON
MAVLANGUE : ae
VERS OUTPUT CH
SELECT :4 Y
SET:
EXIT
:ACTION
elf "OFF,"
remote
warning will not
appear if invalid
key is pressed.
Press ACTION
to return to normal screen.
consumerproducts @panasonic.com
Advertisement
