Simple Steps To Start - Samsung WA41A3 A Series User Manual

04 Time
05 POWER
06 START/PAUSE
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.

Simple steps to start

1. Press POWER to turn on the dryer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Temp. and
Time) as necessary.
4. Optionally, you can activate options
available by pressing the relevant
button (Wrinkle Prevent).
5. Press START/PAUSE.
DV3000A(SEM)_DC68-03784P-00_EN.indd 37
Press to adjust the drying time for the Manual Dry cycles. This
option is not available with the Sensor Dry cycles because the
dryer determines the drying time by sensing the current moisture
level of the load.
* Wrinkle Prevent
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press and hold Time for 3 seconds to activate
this feature. The load is dry, and can be removed at any time
during the Wrinkle Prevent cycle.
Press to turn on or off the dryer.
Press to start or stop operation.
To change the cycle during operation
1. Press START/PAUSE to stop operation.
2. Select a different cycle.
3. Press START/PAUSE again to start the
new cycle.
English 37
2020-12-07 4:50:59