Related Manuals for Samsung WA40A3005AW
Summary of Contents for Samsung WA40A3005AW
- Page 1 Washer User manual WA40A3***A* / WA41A3***A* DC68-03850F-04_IB_WA3000A_EN.indd 1 2024-05-13 11:49:35...
-
Page 2: Table Of Contents
Contents Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING IMPORTANT SAFETY INSTRUCTION Installation Unpacking your washer Overview of your washer Basic location requirements Important note to installer Step-by-step installation Operating instructions Loading your washer Getting started... - Page 3 Maintaining your washer Cleaning the exterior Cleaning the interior Storing your washer Preserving the top cover and the front frame Cleaning the softener compartment Cleaning mesh filter Self Clean Troubleshooting Checkpoints Information codes Specifications Fabric care chart Helping the environment Declaration of conformity Specification sheet Cycle chart...
-
Page 4: Safety Information
Safety information Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. -
Page 5: California Proposition 65 Warning
These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it. - Page 6 Safety information Safety information 8. Do not repair or replace any part of the appliance or attempt any servicing unless it is specifically recommended in the user-maintenance instructions or in published user- repair instructions that you understand and have the skills to carry out. 9.
- Page 7 Plug the power plug into the wall socket in the right direction so that the cord runs towards the floor. • If you plug the power plug into the socket in the opposite direction, the electric wires within the cable may be damaged and this may result in electric shock or fire. This appliance must be properly grounded.
- Page 8 Safety information Safety information Installation cautions CAUTION Position the appliance so that the power plug is easily accessible. • Failing to do so may result in electric shock or fire due to electric leakage. Install your appliance on a level and hard floor that can support its weight. •...
- Page 9 Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washer before using it. Do not insert your hand under the washer. • This may result in injury. Do not touch the power plug with wet hands. •...
- Page 10 Safety information Safety information • WARNING : Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance condition that could result in physical injury, property damage, and/or appliance damage. Remove your hands from the top of the washing machine before closing the lid. •...
- Page 11 Open the faucet and check if the water supply hose connector is firmly tightened and that there is no water leaking before using the product. • If the water supply hose connectors are loose, it may result in water leakage. Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- Page 12 Safety information Safety information • If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface and use a sponge to clean it. Never use a metal brush. Do not use dry cleaning detergent directly in the tub and do not wash, rinse, or spin laundry contaminated by dry cleaning detergent.
-
Page 13: Installation
Unpack your washer and inspect it for shipping damage. Make sure you have received all the items shown below. If your washer was damaged during shipping, or you do not have all of the items, contact 1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit. -
Page 14: Overview Of Your Washer
Overview of your washer Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 01 Drain hose 02 Hose guide... - Page 15 Adjustable Plier Measuring tape NOTE • If you lose an accessory and want to purchase a replacement, contact the Samsung service center (1-800-SAMSUNG (1-800-726-7864)). • The design of the parts and accessories may differ from the pictures above. Their design is subject to change without notice for product improvement.
-
Page 16: Basic Location Requirements
Installation Basic location requirements Electrical WARNING • 120 Volt 60 Hz 15 AMP fuse or circuit An improperly connected equipment- breaker. grounding conductor can increase the risk Individual branch circuit serving only • of electrical shock. Check with a qualified your Washer is recommended. - Page 17 Water Drain facility To correctly fill your Washer in the proper The recommended height of the standpipe amount of time, water pressure of 20 to is 39 in (99 cm). The drain hose must be 116 psi (137 to 800 kPa) is required. routed through the drain hose clip to the Water pressure less than 20 psi may cause standpipe.
- Page 18 Installation Alcove or closet installation Side view - closet or confined area Minimum clearances for closet and alcove installations: 1 in / Closet 1 in / Sides 25 mm front 25 mm 5.9 in / 21 in / Rear 150 mm 533 mm If the washer and dryer are installed together, the closet front must have at least...
- Page 19 Required dimensions for Installation 59.3 in (150.5 cm) 27.0 in (68.6 cm) 39.3 in (99.8 cm) 43.9 in (111.7 cm) 48.0 in (310.0 cm 24.0 in (155.0 cm 3.0 in (7.6 cm) 29.3 in (74.4 cm) 43.9 in (111.7 cm) NOTE * Required spacing English 19...
-
Page 20: Important Note To Installer
Installation Important note to installer Please read the following instructions carefully before installing your washer. These instructions should be retained for future reference. We recommend you hire a professional to install this washer. Installation flow chart Removing the Selecting a shipping bolts Connecting the Adjusting the... -
Page 21: Step-By-Step Installation
Step-by-step installation STEP 1 Selecting a location NOTE Before you install the washer, make sure the location: • Has a hard, level surface without carpeting or flooring that may obstruct ventilation. • Is away from direct sunlight. • Has adequate ventilation. •... - Page 22 Installation 1. Connect the ends of the water supply hoses to the hot and cold faucets. 2. Tighten the fittings by hand until they are snug, and then tighten them an additional two-thirds of a turn with a plier. CAUTION When you fasten the fittings, do not fasten them too tightly or apply tape or sealant to the faucets or water supply intakes.
- Page 23 4. Connect the ends of the water supply hoses to the water supply intake connections at the back of the washer. CAUTION The water supply hose connected to the hot faucet must be connected to the hot water supply intake and the water hose connected to the cold faucet must be connected to the cold water supply intake.
- Page 24 Installation STEP 3 Connecting the drain hose The end of the drain hose can be positioned in three ways: In a Wall standpipe or Floor standpipe The height of end of standpipe must be no lower than 39 in (99 cm) and no higher than 96 in (245 cm).
- Page 25 NOTE Connect the hose guide (A) within 3~5 in (7.6~12.7 cm)* from the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the washer. NOTE The drain hose can be installed to a 96 in (245 cm) maximum, but the draining capability can be reduced at this height.
- Page 26 Installation 3. If the washer is level, the pulsator (A) is positioned at the center of the water as shown in the figure. If not, level your washer by turning the front leveling feet clockwise or counterclockwise as necessary. NOTE •...
- Page 27 STEP 6 Running a test cycle Run a test cycle as follows to check if your washer is properly installed. 1. Load about 6 pounds of laundry into the tub. 2. Press POWER to turn on your washer. 3. Select RINSE + SPIN by turning the Cycle Selector. 4.
-
Page 28: Operating Instructions
Operating instructions Operating instructions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Loading your washer WA41A3***A* • Fill the tub with dry, unfolded clothes evenly around in order to enhance washing efficiency and prevent excess wear, or wrinkling of the load. - Page 29 To input a blanket (WA41A3***A* models only) Fold the blanket into the blanket-specific net as shown, and then insert in the tub below the plastic area of the tub. CAUTION Make sure the laundry is inserted completely. • Any exposed part of the laundry may cause damage to the machine or the laundry itself, or a water leak.
-
Page 30: Getting Started
Operating instructions Getting started 1. Add liquid (or powder) detergent and additives (see the "Detergent use" section on page 36). 2. Load your washer. 3. Select the appropriate cycle and options for the load (see the "Washing a load of laundry" section page 31). -
Page 31: Washing A Load Of Laundry
Washing a load of laundry WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Control panel Turn the Cycle Selector to select the desired cycle. The indicator by 01 Cycle Selector the cycle name lights up. -
Page 32: Cycle Overview
Washing a load of laundry The water level is Extra high. However, you can select the water level manually by pressing this button. 04 Water Level Spin Only: This cycle runs a spin cycle only. Press and hold Water Level for 3 seconds. Press once to turn your washer on. -
Page 33: Options
Cycle Description Use for loads that need rinsing only or to add rinse-added RINSE + SPIN fabric softener to a load. Use to clean dirt and build-up from the tub. Regular use (after SELF CLEAN every 20 washes) is recommended. Options Child Lock •... - Page 34 Washing a load of laundry NOTE WARNING If a child enters the washer, the child may Adding laundry when Child Lock is on To add laundry, deactivate the Child Lock become trapped and suffocate. function. To deactivate the Child Lock CAUTION function, press and hold Temp.
-
Page 35: Washing Clothes Using The Cycle Selector
Washing clothes using the cycle selector Pause Option Your new washer makes washing clothes easy, using Samsung’s “Fuzzy Control” To remove or add laundry items, follow automatic control system. When you select these steps: a wash program, the machine will set the 1. -
Page 36: Atc (Auto Temperature Control)
Washing a load of laundry ATC (Auto Temperature Control) ATC is the control function that the NOTE washer controls water temperature with If you select NORMAL cycle, this cycle is the temperature sensor (thermistor). regulation and UL cycle. Since new washers must reduce the amount of energy usage as NOTE a first priority, customers will notice more... -
Page 37: Features
Features To add detergent NOTE Never exceed the manufacturer’s recommendations when adding detergent. WA41A3***A* 1. Open the lid. 2. Load the recommended amount of liquid or powder detergent into the tub. 3. Load the laundry and close the lid. WA40A3***A* English 37 DC68-03850F-04_IB_WA3000A_EN.indd 37 2024-05-13... - Page 38 Washing a load of laundry Loading the Bleach compartment CAUTION Use the liquid chlorine bleach only. 1. Add chlorine bleach to the bleach compartment (B). DO NOT exceed the bleach compartment. NOTE • Avoid splashing or over–filling the compartment. • Never pour undiluted liquid chlorine bleach directly onto the load or into the tub.
- Page 39 Loading the fabric softener compartment (WA40A3***A* models only) 1. Pour the recommended amount of liquid fabric softener into the softener compartment (A). 2. Pour warm water into the softener compartment (A) to dilute fabric softener. Do not exceed the MAX line. NOTE •...
-
Page 40: Maintaining Your Washer
Maintaining your washer Maintaining your washer WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve, heater and pump. Cleaning the exterior 1. -
Page 41: Preserving The Top Cover And The Front Frame
Preserving the top cover and the front frame Do not place any heavy or sharp objects or NOTE a detergent box on the washer. They can Since the entire washer has a high-gloss scratch or damage the top cover of the unit. finish, the surface can be scratched or damaged. -
Page 42: Cleaning Mesh Filter
Maintaining your washer Cleaning mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washer, and then unplug the power cord. 2. Close the faucet. 3. Loosen and disconnect the water hose from the back of the washer. -
Page 43: Self Clean
Self Clean Certain usage and environmental conditions may result in some residue build-up or odor in the washer tub. To prevent this build-up or odor and keep your washer tub fresh and clean, perform the SELF CLEAN cycle at least once a month or every 20 cycles. Perform the recommended procedure below when using the SELF CLEAN cycle. -
Page 44: Troubleshooting
Troubleshooting Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Action • Make sure you use rated power for the product. Does not turn on. • Make sure the power cord is completely plugged in. •... - Page 45 Problem Action • Make sure the washing machine is set on a level floor. If the floor is not level, use the levelling feet to adjust the washing machine. • Make sure the washing machine is not contacting any other object.
- Page 46 Troubleshooting Problem Action • Fully open both water taps. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct water taps. Flush water lines. • Disconnect the hoses and clean the screens. The hose filter screens may be clogged.
- Page 47 Problem Action • Make sure all hose connections are tight. • Make sure the water supply hose's rubber packing is in the correct position. Screw tightly again. • Make sure the end of the drain hose is correctly inserted and secured to the drain system.
- Page 48 Excessive suds collect in recesses and can cause foul odours. Has odours. • Run cleansing cycles to sanitize periodically. • Dry the washing machine interior after a cycle has finished. If a problem persists, contact a local Samsung service center. 48 English DC68-03850F-04_IB_WA3000A_EN.indd 48 2024-05-13 11:49:40...
-
Page 49: Information Codes
Information codes The washer may display information codes to help you understand what is occurring with your washer better. Code Meaning Lid is open when washer is running. Hot LED • Close the lid tightly and restart the cycle. Flashes If the information code remains, contact a customer service center. - Page 50 Troubleshooting Code Meaning Your Washer has tried to fill but has not reached the proper water level. NOTE High LED When the High LED is flashing, the washer drains for 3 minutes. During Flashes this time, the POWER button is inoperative. •...
- Page 51 Ensure that the cold water tap and the hot water tap are connected LEDs flash correctly. • If the information code remains, contact a customer service center. For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG). English 51 DC68-03850F-04_IB_WA3000A_EN.indd 51 2024-05-13 11:49:40...
-
Page 52: Specifications
Specifications Specifications Fabric care chart The following symbols provide garment care The clothes washer can not ensure direction. The clothing care labels include these temperatures because the actual symbols for drying, bleaching, drying and temperature of the water entering your ironing, or dry cleaning when necessary. - Page 53 Heat setting Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Any heat Drip dry No heat / Air Dry flat Iron dry or steam temperatures High Medium Warning symbols for laundering Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron)
-
Page 54: Helping The Environment
Specifications Helping the environment • Your washer is manufactured from • Do not exceed the detergent quantities recyclable materials. If you decide to recommended in the detergent dispose of it, please observe local waste manufacturers’ instructions. disposal regulations. Cut off the power •... -
Page 55: Specification Sheet
Specification sheet Type Top loading washer WA40A3***A* Model name WA41A3***A* A. Height 43.9 (111.7) B. Width 27.0 (68.6) Dimensions (inches (cm)) C. Height with lid open 59.3 (150.5) D. Depth 29.3 (74.4) Water pressure (psi (kPa)) 20 - 116 (137 - 800) NET weight (kg (lb)) 58.0 (127.9) Spin revolution... -
Page 56: Cycle Chart
Specifications Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting Temp. Water Level : factory setting H: Hot EH: Extra High : can be selected W: Warm H: High EW: Eco Warm M: Mid C: Cool L: Low... - Page 57 If the product is located in an area where service by a SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG authorized service center for service.
- Page 58 SAMSUNG may also replace any part covered by this warranty with a new or reconditioned part. Replacement parts and products are warranted for the remaining portion of the original product’s warranty or ninety (90) days, whichever is longer.
- Page 59 REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
- Page 60 SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center.
- Page 61 SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
- Page 62 Warranty (CANADA) Warranty (CANADA) NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE, OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY...
- Page 63 Memo DC68-03850F-04_IB_WA3000A_EN.indd 63 2024-05-13 11:49:42...
- Page 64 Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French) DC68-03850F-04 DC68-03850F-04_IB_WA3000A_EN.indd 64 2024-05-13 11:49:43...
Need help?
Do you have a question about the WA40A3005AW and is the answer not in the manual?
Questions and answers