Specifications
UP-990AD
Power requirement
100 to 240 V AC, 50/60 Hz
Input current
2.4 A to 1.3 A max. at 25 °C
Operating temperature
5 °C to 35 °C (41°F to 95°F)
Operating humidity
20 % to 80 %
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20 % to 80 %
Storage and transport pressure
700 hPa to 1,060 hPa
316 × 132.5 × 305 mm (w/h/d)
Dimensions
(12 1/2 × 5/ 1/4 × 12 1/8 inches)
Mass
8 kg (17 lb 10 oz) (printer only)
Thermal head
Thin-film thermal head, 2,560 dots
Gradation
256-level gradation (8-bit)
EIA: 1,280 × 508 dots
Resolution
CCIR: 1,280 × 612 dots
Picture size
When "S:STD" is selected from
"SIDE"
EIA: 188 × 143 mm
CCIR: 188 × 140 mm
When "S:SIDE" is selected from
"SIDE"
EIA: 249 × 190 mm
CCIR: 252 × 188 mm
Printing speed About 8 sec./image
(at standard setting)
Picture memory Analog mode:
6 frames (800 k × 8 bits per frame)
Digital mode:
3,414 × 2,560 dots max.
Input connector VIDEO IN (BNC type)
EIA or CCIR composite video signals
1.0 Vp-p, 75 ohms/high-impedance
(EIA/CCIR automatically
discriminated)
Output connector
VIDEO OUT (BNC type)
EIA or CCIR composite video signals
1.0 Vp-p, 75 ohm loop-through/EE
switchable
REMOTE connector (stereo mini jack)
1 GND
2 PRINT SIGNAL (TTL)
Input of LOW pulse over 100 msec.
initiates print.
3 PRINT BUSY (TTL)
Goes HIGH during printing.
Addition of interface
USB (USB 2.0 compatible)
Accessories provided
Print media (1)
USB Cable 1-824-211-41 (Sony) (1)
BNC Cable 1-551-475-32 (Sony) (1)
Thermal head cleaning sheet (1)
Media label (1)
CD-ROM (Operating Instructions,
printer driver, printer driver install
guide) (1)
Software License Agreement (1)
Before Using this Printer (1)
Service Contact List (1)
21
Specifications