Note For Parts List - Denon DCD-715 Service Manual

m DCD-715/615
20
DATA XLT
CXA1372S
NOTE FOR PARTS LIST
some case supplying of part may be refused.
WARNING:
Parts marked with this symbol /\
e Resistors
Ex: AN 14K 26 182 G FR
Type Shape Power Resist- Allowable Others
| and per- ance error
formance |
: Carbon
: Composition
> Metal oxide film
: Pulse-resistant type
Low noise type
: Non-burning type
: Fuse-resistor
: Lead wire torming
: Winding
Metal film
Metal mixture
* Resistance
18 2 => ~=1800 ohm = 1.8 kohm
[ L____ Indicates number of zeros after effective number.
2-digit effective number.
* Units: ohm
41R 2 =~) 1.20hm
LH. 1-digit effective number.
2-digit effective number, decimal point indicated by R.
+ Units: onm
+ Capacity (electrolyte only)
22 2 = 2200uF
[ T__._ Indicates number of zeros after effective number.
2-digit effective number.
* Units: uF.
2 R 2 = 2.2uF
| Lou 1-digit effective number.
2-digit effective number, decimal point indicated by R.
* Units: uF.
-INPUT SHIFT REGISTER -ADDRESS DECODER
OUTPUT DECODER
-IIL DATA REGISTER
uw
s
<
have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
(2) S STOP
Ex.:
: Aluminum foil
: Aluminum solid
: Tantajum electrolytic
@ When ordering of part, clearly indicate "1" and "|" (i) to avoid mis-supplying.
@ Ordering part without stating its part number can not be supplied.
@ Part indicated with the mark "*" is not illustrated in the exploded view.
@ Not including Carbon Film +5%, 1/4W Type in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
CE
Type
«TRACKING
(FSET}®) FSET
PHASE COMPENSATION
@ Capacitors
O4W 1H 2R2 M BP
Shape Dielectric Capacity Allowable Others
and per- strength error |
formance
: High stability type
electrolytic
: Non-polar type
electrolytic
> Fitm
» Ceramic
: Ceramic
: OW
: Mica
: Metallized
: Ripple-resistant type
: For charge and discharge
: For assuring high
frequency
> UL pan
CSA part
: UL-CSA type
: Lead wire forming
: Metallized
» Capacity (except electrolyte)
2.22
= 2200pF = 0.0022uF
LuMore than 2)— Indicates number of zeros after effective number.
© Units: uF.
2 2
10 or 1)
2-digit effective number.
1 = 220pF
Indicates number of zeros after effective Number.
2-digit effective number.
* Units: pF.
* When the dielectric strength is indicated in AC. "AC" is included after thed i eelectric
strength value.