(including amplifiers) that produce heat. specified. Connect standard straight-through Ethernet cable (not supplied) to LAN/USB (RJ45) port in back section of BCS300 and the other end to The apparatus should only be used in moderate climates. corresponding port of PoE Data/Power supply Power over Ethernet (POE) IEEE 802.Jat Type 2 (30W) (not supplied).
Page 3
Your local administrative office can advise you of the responsible waste disposal point. Bluesound Professional is a trademark of Bluesound International. Bluesound International is a division of Lenbrook Industries Limited. Bluesound, All Rights Reserved...
SAVE THE PACKAGING Please save the box and all of the packaging in which your BCS300 arrived. Should you move or otherwise need to transport your BCS300, this is by far the safest container to do so. We’ve seen too many otherwise perfect components damaged in transit for lack of a proper shipping carton, so please: Save that...
WIRED (ETHERNET) CONNECTION Using an Ethernet cable (not supplied), connect one end to BCS300’s LAN port and the other end directly to the POE port of a PoE Data/Power supply – Power over Ethernet (POE) IEEE 802.3at Type 2 (30W).
Page 6
3 Loosen dogleg to unlock counterclockwise counterclockwise 4 Tighten dogleg. Be sure not to tighten too fast or too tight. clockwise 5 Repeat Step 3 and 4 for the three other doglegs.
Page 7
6 Install supplied grille Grill Options • BCS Round Grille White (supplied) • BCS Round Grille Black (sold separately) • BCS Square Grille White (sold separately) • BCS Square Grille Black (sold separately)
Page 8
All rights reserved. Bluesound and Bluesound logo are trademarks of Bluesound Professional, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of Bluesound Professional. BCS300 OM EN V05 - MAR 2024...
Need help?
Do you have a question about the BCS300 and is the answer not in the manual?
Questions and answers