Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bluesound Professional BSP1000
Summary of Contents for Bluesound Professional BSP1000
- Page 1 BSP1000 Network Streaming Speaker Owner’s Manual...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read instructions - All the safety and operating instructions should be read • Damage Requiring Service - Unplug this product from the wall outlet and refer before the product is operated. servicing to qualified service personnel under the following conditions: •... -
Page 3: Notes On Environmental Protection
To ensure compliance, operations at closer than this distance is not recommended. IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN. Bluesound Professional is a trademark of Bluesound International. Bluesound International is a division of Lenbrook Industries Limited. ©Bluesound, All Rights Reserved... -
Page 4: Getting Started
• Quick Setup Guide SAVE THE PACKAGING Please save the box and all the packaging in which your BSP1000 arrived. Should you move or otherwise need to transport your BSP1000, this is by far the safest container to do so. We have seen too many... -
Page 5: Identification Of Controls
• Connect standard straight-through Ethernet cable (not Flashing green Connecting to network shares supplied) to BSP1000’s LAN/USB (RJ45) port and the other Solid red Cannot boot; drive error end to corresponding port of PoE+ or PoE++ Data/Power Upgrade mode supply. -
Page 6: Factory Reset Procedure
• Use the RESET button to restore BSP1000 to its factory default settings. • Factory Reset is recommended if your BSP1000 is not functioning or internet firmware upgrade has failed. - Page 7 CONNECTING ETHERNET CABLE TO BSP1000 PLAYER TO ACCESS REAR I/O PORT PLAYER SETTINGS (SETTINGS/PLAYER/AUDIO) Remove 4 screws holding I/O plate. Use screwdriver edge or sharp knife to lift plate. Pass Ethernet cable through grommet and hole to connect cable, before re-attaching I/O plate for proper operation.
-
Page 8: Specifications
With Port Plug installed 1 x Type-A port for connection to Specifications are subject to change without notice. Check out www.bluesoundprofessional.com for updated documentation or latest information about BSP1000. USB memory stick (FAT32 or NTFS formatted) and supported peripherals 1 x Type-B (mini) for product servicing... - Page 10 A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. Bluesound International, Bluesound Professional, Bluesound, the stylized wordmark and “B” logotype and all other Bluesound product names and taglines are trademarks or registered trademarks of Bluesound International, a division of Lenbrook Industries Limited.
Need help?
Do you have a question about the BSP1000 and is the answer not in the manual?
Questions and answers