Unexpected behaviour
Problem
The oven compartment
does not heat up.
After moving house, the
combination steam oven
no longer switches from
the heating-up phase to
the cooking phase.
During operation, an un-
usually high amount of
steam leaks out or
steam leaks out from dif-
ferent places to usual.
During cleaning with
, water has ac-
HydroClean
cumulated in the drip
channel up to the level
of the plateaus.
The
and
Start at
functions are not avail-
able.
Cause and remedy
Demo mode is activated.
The combination steam oven can be operated, how-
ever the heating elements will not work.
Deactivate demo mode (see "Settings" – "Show-
room programme").
The oven compartment has been warmed up by the
warming drawer in operation underneath it.
Open the door and let the oven compartment cool
down.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance dif-
fers from the old one by at least 300 m.
To adjust the boiling temperature, you need to de-
scale the appliance (see "Cleaning and care" –
"Care").
The door is not closed properly.
Close the door.
The door seal is not correctly installed.
Press the door seal in all the way round the door to
make sure it is installed snugly and evenly.
The door seal is damaged, e.g. cracked.
Call the Miele Customer Service Department to re-
place the door seal.
Do not cook with steam or clean using
until you replace the seal.
The combination steam oven is leaking.
Remove the water and, if necessary, continue the
cleaning process until the end.
Contact the Miele Customer Service Department.
Finish at
The temperature in the oven compartment is too
high, e.g. after a programme has finished.
Open the door and let the oven compartment cool
down.
These functions are not generally available in mainten-
ance programmes.
Problem solving guide
HydroClean
157