GiBiDi EWSETX1WALLB Manual

TECHNICAL FEATURES
Model
Carrier frequency
ISM European frew.range
Radiated carrier (E.R.P.)
Modulation
Size
working temperature
Number of channels
transmission
COMPATIBLE PRODUCTS
monodirectionals: Martin, Sail, Runner RE and Runner RE-B
bidirectionals:
KEY TO SYMBOLS
UP
stop
led
DOWN
REMOTE CONTROL
KEY PRESSURE TIME
N
X"
Press key fo "X"
P
seconds
CONVERT THE REMOTE CONTROL FROM BIDIRECTIONAL TO UNIDIRECTIONAL AND VICE VERSA
P2 P2
remove the
battery
STORAGE OF THE TRANSMITTER IN A RUNNER RE OPERATOR (MONO-DIRECTIONAL)
A - Memorization of the first transmitter on a RUNNER RE operator
A - Memorizzazione del primo trasmettitore su un dispositivo UNIDIREZIONALE
433.05 MHz - 434.79 MHz
Digitale 00K (ON-OFF Keyng)
monodirectional - Bidirectional
Runner REB, REB-B
P2
FRONT OF THE
TRANSMITTER STATUS
New transmitter not
stored
Transmitter already
stored
press and hold the
P2 buttonand place
the battery
N
4"
EWSETX1WALLB
433.920 MHz
0 dBm
80x80x15 mm
0°C + 50°C
1
DEFAULT
programming P2
CR2430
P2 P2
OPERATION CONFIRMATION
Click-Clak
Click-Clak
P2 P2
Click-Clak Click-Clak
WALL1B
BACK OF REMOTE CONTROL
replace the battery only if it is the
same or equivalent, dispose of
used batteries in compliance with
current regulations
P2
POWER-UP MOTOR/CONTROL UNIT
Cut power off
1 flash:
One-way;
2 flashes:
Bidirectional
N
Click-Clak Click-Clak
1"
EN
Give power
supply