Table of Contents
Advertisement
NN-8507,
NN-8557
NN-8807,
NN-8857
OPERATION PROCEDURE
CLOCK SET
MICROWAVE
COOKING
(TWO STAGE)
CYCLIC DEFROST
AUTO SENSOR
COOKING
AUTO REHEAT
COMBINATION
AUTO WEIGHT
COMBINATION
COOKING
COMBINATION-
TIME COOKING
BAKING WITHOUT
PREHEAT
BAKING
WITH
PREHEAT
GRILL WITHOUT
PREHEAT
GRILL
WITH
PREHEAT
NOTES WHEN PROGRAMMING:
1. CLOCK SET:
(2) The clock will keep the time of day as long as oven is plugged in and
electricity is supplied.
2. AUTO SENSOR COOKING:
(1) The Auto Sensor system works by detecting a build-up of steam on
the humidity sensor. As foods cook in a microwave oven, steam is
produced. When
foods are covered, the steam will build up and
escape from the dish in a burst. This burst of steam is detected by the
humidity sensor and then the oven automatically calculates the re-
maining cooking time.
When an Auto Sensor Category is selected, A1 to A8 (F1 to F2) will
for longer than one minute when A1 through A8 appears in the display
window. Opening the door may cause
inaccurate cooking results.
remaining cooking time immediately appears in the display window
and begins to count-down. At this time, the oven door may be opened
to stir, turn or add foods.
(3) The room air temperature surrounding the oven should not be above
35°C when using Auto Sensor Cooking feature. Inaccurate cooking
May result.
_— NO —
Set Time
rel et
Pana p
a
Start
b
Yn Ps @ a
Y +
o
a
YN +
ee
Set Time
rel fel
(Preheating)
Set Time
Pelt
(Preheating)
(5
=
condition.
3. BAKING - AUTO PREHEATING
4. GRILLING - AUTO PREHEATING
(3) After preheating, open oven door and place food (on Splash Guard)
on to Slide in Shelf.
—-4-—
Advertisement
Table of Contents
