Table of Contents
Advertisement
HOW TO MOUNT
THE SIDE DEFLECTOR
WARNING: To prevent the en-
gine from starting, disconnect
the wire from the spark plug.
1. Remove the rear discharge assembly
(Figure 4).
2. Slide the notch in the side deflector
around the shoulder bolt (Figure 3).
3. Fasten the front and back of the side de-
flector with the fasteners (Figure 3).
Wing Nut
Side Deflector
FINAL ASSEMBLY
Before you use the mower, check the assem-
bly of the wheels, the handle, and the controls.
Make sure all the fasteners are tight. Make
sure the throttle control and the engine stop le-
ver work correctly.
F−96498
PREPARATION
Shoulder
Bolt
Figure 3
HOW TO MOUNT THE
REAR DISCHARGE ASSEMBLY
WARNING: To prevent the en-
gine from starting, disconnect
the wire from the spark plug.
1. Remove the side deflector (Figure 3).
2. Remove the mulcher plug.
3. Slide the notch in the rear discharge as-
sembly
around
(Figure 4).
4. Fasten the bottom of the rear discharge
assembly with the fasteners (Figure 4).
Wing Nut
Rear Discharge
Assembly
13
the
shoulder
Shoulder
Bolt
Figure 4
bolt
Advertisement
Table of Contents
