Table of Contents
Advertisement
Precautions
Refer installation work to your dealer.
Skill and experience are required for
installation to avoid risk of fire, electric shock,
injury and damage.
Do not install or wire during lightning
storms.
Otherwise fire or electric shock may result.
Avoid placing the product in unstable
positions.
Failure to observe this may cause the product
to fall resulting in injury.
Stop operation immediately when
something is wrong with the product.
When smoke goes up from the product or the
smell of smoke comes from the product,
continued use will result in fire.
Turn off the center module connected with
this product and contact your dealer.
Do not insert objects inside the product.
If metallic items enter the product, it may
cause fire or electric shock.
Turn off the center module connected with
this product and contact your dealer.
Do not attempt to disassemble or modify
the product.
Otherwise fire or electric shock may result.
Consult your dealer for repair or inspections.
Match the wire accurately.
Short circuit or improper connection may
cause fire.
Avoid installing the product in locations
where it is subject to damage by salt or
corrosive gas.
Otherwise, the mounting fixtures will
deteriorate, causing the product to fall and
leading to accidents.
6
WX-CM470P_PUQX1033ZAV1_OI_en.indd
6
When installing the product, use the
provided screws and nuts.
Failure to do so may cause the product to fall,
resulting in injury or accidents.
Conduct periodic inspections.
Rust on the screws and nuts may cause the
product to fall resulting in injury. Refer
inspection to your dealer.
Select an installation surface that can
support the total weight.
Selecting an inappropriate installation surface
or method may cause the product to fall or
topple over, resulting in injury. Contact your
dealer.
Do not install the product in locations
subject to vibration.
Otherwise the mounting portions will
deteriorate, causing the product to fall and
leading to accidents.
Tighten screws and nuts to the specified
torque.
Failure to do so may cause the product to fall,
resulting in injury or accidents.
Refer installation to your dealer.
Take measures to prevent the product
from falling.
Failure to do so may cause injury.
If the product displays any abnormalities,
do not leave the problem unattended.
If left unattended for longer periods of time,
parts will deteriorate, causing the product to
fall and leading to accidents.
Refer disassembling to your dealer.
Do not install the product in locations
where it will become oily.
Otherwise the mounting fixtures will
deteriorate, causing the product to fall and
leading to accidents.
2021/10/27
11:20:08
Advertisement
Table of Contents
