LuxenHome WHF988 Instruction Manual

Product Name: Gray Resin Column Outdoor Fountain with LED Light
SKU #: WHF988
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the
highest standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts the packaging inside the carton to ensure there are no missing or damaged parts. If any
parts are missing or damaged, do not attempt to assemble or use the product. Please save the carton for
return and/or storage.
Note: the pump is packaged separately inside the fountain shipping carton. Please check packaging
thoroughly.
CARTON CONTENTS:
Description
Fountain
Pump w/ Adaptor
Compatible Pumps for this fountain:
Pump Model No.
JR450/LED
JB450/LED
YH707/LED
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. From the opening at the back of the fountain, insert the water supply tube into the pump outlet.
4. Connect the fountain LED cord to the pump's LED cord and twist to tighten. Lead the pump power
cord out through the cord slot at the back opening and connect to plug.
5. Make sure the water tube is properly connected with the pump and is not crimped.
6. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge
of the basin.
7. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
8. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may
be air in the pump. It may take several minutes until all the air escapes.
9. To eliminate the possibility of water damage around your fountain, check for leaks and excessive
splashing after the initial setup of your fountain. It is highly recommended that this fountain be
placed in an area where it cannot be damaged.
10. Do not leave your fountain running for extended periods of time when no one is present to observe
the performance.
11. Check the area around your fountain on a regular basis to ensure that there is no leakage.
Quantity
1
1
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.