How To Drain Remaining Water In The Product - LG ZHBW041GA0 Service Manual

Air-to-water heat pump
Table of Contents

Advertisement

4. How to drain remaining water in the product

CAUTION
If the product is not used for a long period of time with remaining water, there is a risk of freezing in winter.
Step1
Step2
- To use the product again, you have to refill water in it. Refer to 'Water Charging' of 'Installaion' part in installation
manual.
① Outlet Valve
② Inlet Valve
③ Cock
④ Drain Valve
Step1. To drain most of the water out of the product, remove
the water pipes from the inlet/outlet valve(①,②). After
draining, reconnect them.
Step2. To drain the rest of the water out of the product, open
the cock(③) of the drain valve(④) counterclockwise.
After draining, lock it in the opposite direction to the
end.
- 56 -
Copyright © 2023 - 2024 LG Electronics Inc.
All rights reserved. Only training and service purposes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zhbw048ga0Zhbw055ga0Kphtc411mKphtc481mKphtc551m

Table of Contents