Related Manuals for EnerSys TruckiQ-10
Summary of Contents for EnerSys TruckiQ-10
- Page 1 Battery Monitoring Truck iQ™ Smart Battery Dashboard OWNER’S MANUAL UL Listing applies in the United States and to certain models only. www.enersys.com...
-
Page 2: Table Of Contents
CONTENTS Description ..........3 Features ..........3 Technical Specifications ......3 Display Description & Settings ....5 Main Screen ........5 Color-Coded Modes ......5 Battery Errors for PN3 ......6 Screen 2 ..........6 Warnings and Settings ......9 Buzzer and Relay Settings ....9 Menu Settings ........10 Dimensions ..........11 Installation ..........11 Mechanical Installation ......11 Electrical Installation ......12... -
Page 3: Description
TPPL with ATP* ® ® • Truck iQ™ smart battery dashboard PN3 batteries • Touch screen display * Applies to North American version only; please contact your EnerSys representative for more ® details. Technical Specifications Item Description 15V to 120V (PN2) - Page 4 TECHNICAL SPECIFICATIONS Technical Specifications (cont.) Item Description Information PN2 Model: TruckiQ-10 Information PN3 Model: TruckiQ-20 Certified by UL to UL 583 ® Radio Spectrum (Directive 2014/53/EU - RED) FCC ID: T7V4561HM (Panasonic industrial 802.14.4 modem – 2,405-2,475GHz) FCC ID: WAP2001 (Cypress BLE PRoC – 2,402-2.48GHz)
-
Page 5: Display Description & Settings
DISPLAY DESCRIPTION & SETTINGS Main Screen The Truck iQ™ smart battery dashboard has a Mode Usage Touch Screen TFT 4.3 inch. Remaining Work Time Sleep/Eco/ Battery Temperature Normal/Heavy Figure 1: Main Screen Activation Button (only PN3): • Acknowledge warning • Turn on: short press will turn the battery on •... -
Page 6: Battery Errors For Pn3
Icon to acknowledge Active warnings fault. (Level >=3). Overload current warning (90% of the max limit) * Applies to North American version only; please contact your EnerSys representative for more details. ® Screen 2 Battery details • Type: Nominal battery voltage & kWh •... - Page 7 DISPLAY DESCRIPTION & SETTINGS Screen 2 (cont.) Cycle/trip details • Real time battery voltage • Real time current • Average consumption (trip) • Discharged kWh (trip) • Real time cells voltage min and max • Real time cells temperature min and max Truck information •...
- Page 8 DISPLAY DESCRIPTION & SETTINGS Screen 2 (cont.) Password protection and SoC/Relay manual settings SoC/Relay threshold can be adjusted and set directly on the password protection display. General settings are not password protected (i.e. language, time, etc.).
-
Page 9: Warnings And Settings
NexsSys TPPL 30% SoC 20% SoC ® NexSys TPPL with ATP* 10% USoC 5% USoC ® NexSys 4% USoC** 2% USoC** ® *Applies to North American version only; please contact your EnerSys representative for more details ® **Are not adjustable... -
Page 10: Menu Settings
DISPLAY DESCRIPTION & SETTINGS Menu Settings Option Setting Description Bluetooth BLE ON ON/OFF Enable/Disable BLE option CAN ON ON/OFF Enable/Disable CAN option Buzzer ON ON/OFF Enable/Disable Buzzer option PN3 – USoC threshold to activate buzzer warning Warning 1 beep every 30 sec Level Buzzer CDI settings are used, when installed... -
Page 11: Dimensions
DIMENSIONS AND INSTALLATION Dimensions Truck iQ™ smart battery dashboard Figure 2: Dimensions of a Truck iQ™ smart dimensions (mm) battery dashboard PN2 TRUCK - IQ SCALE: 1 28.03.18 SCALE 0.333 SCALE 0.333 163.09 30.7 39.86 Mechanical Installation Install the Truck iQ™ smart battery dashboard fixing bracket on the most suitable part of the truck. -
Page 12: Electrical Installation
INSTALLATION Electrical Installation Truck iQ™ smart battery dashboard cable specifications The cable provides a relay (NC) option, according to the following pin-out. M12A-04PMMP-SF8001 Description PN2 Power Supply cable 6LA20737 Reserved Reserved Relay* (common) Relay (NC) Not used *Relay: 62.5VA/60W – 2A – 250VAC/220VDC Communication via CAN according to the following pin-out. -
Page 13: Tppl Batteries
INSTALLATION PN2 Truck iQ™ Smart Battery Dashboard Flooded and NexSys TPPL Batteries ® Truck iQ™ smart battery dashboard part number Connect the supply cable pins on the +VBAT 6LA20723-PN2 for Flooded and NexSys TPPL and –VBAT on the battery or on the truck side. ®... -
Page 14: Pn3 Truck Iq™ Nexsys ® Ion And Nexsys ® Tppl Atp
INSTALLATION & COMMUNICATION PN2 Truck iQ™ Smart Battery Dashboard Flooded and NexSys TPPL Batteries (cont.) ® Turn the “fastening screw” on the connector to lock the supply cable to the Truck iQ™ smart battery dashboard. Power the Truck iQ™ smart battery dashboard by connecting the traction battery to the truck. -
Page 15: Communication
• Click BLE icon and select the correct Wi-iQ ® battery monitoring device that appeared with the associated battery serial name * Applies to North American version only; please contact your EnerSys representative for more ® details Auto Pairing • Navigate to: 1) Settings 2) I/O 3) Pairing 4) Enable Auto pairing. -
Page 16: Part Numbers
PART NUMBERS Part Numbers Truck iQ™ for Nexsys TPPL/Flooded Truck iQ™ for Nexsys ION/Nexsys TPPL ATP ® ® ® 6LA20723-PN2 6LA20723-PN3 Metal Brackets 6LA20738 Power Supply Cable for No extra power supply 6LA20737-L2 (2m) 6LA20737-L4 (4m) CAN Cable for PN3 6LA20750-L2 (2m) CAN Cable for PN2 6LA20750-L4 (4m) -
Page 17: Service And Troubleshooting
• Disable Auto pairing and enable it again • Scan the device BLE connection issues • Leave the Auto pairing disabled and select the appropriate Wi-iQ(R) device by clicking on the BLE icon Technical support: Refer to our website www.enersys.com to find your local contact. - Page 18 NOTES...
- Page 19 NOTES...
- Page 20 © 2024 EnerSys. All rights reserved. Unauthorized distribution prohibited. Trademarks and logos are the property of EnerSys and its affiliates except UL, CE, UKCA, Android, iOS, and Bluetooth, which are not the property of EnerSys. Subject to revisions without prior notice. E.&O.E.
Need help?
Do you have a question about the TruckiQ-10 and is the answer not in the manual?
Questions and answers