Advertisement
User instructions
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
HALF LOAD WASH SETTING (3 buttons models)
This function is ideal for small loads and saves
water and electricity. It is controlled by the
HALF LOAD button (3) (see section "3.
Description of the controls") and allows washing
in the upper basket only.
IMPORTANT: at the end of the program
remember to deactivate the function to
ensure the next wash is not also carried out in
half load mode by mistake.
A cutlery basket can be placed in the upper basket, while the lower
basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the
lower basket, since the jet of water will only reach the upper basket.
CANCELLING THE CURRENT PROGRAM
To cancel the program in progress the dishwasher must be switched off
by pressing the ON/OFF key (2) (see section "3. Description of the
controls"). Turn the program selector to SOAK and wait for the
dishwasher to start.
On completion of the program, switch off the
dishwasher by pressing the ON/OFF key (2).
CHANGING THE PROGRAM
To change the program in progress the dishwasher must be switched off
by pressing the ON/OFF key (2) (see section "3. Description of the
controls"). Turn the program selector to the program required and then
switch the dishwasher on again by pressing ON/OFF key (2). The
dishwasher will carry out the new program automatically.
Hide quick links:
Advertisement
