Smeg PL663WH Instruction Manual page 27

BEFORE STARTING THE DISHWASHER AFTER PROLONGED
DISUSE:
•
•
•
TROUBLESHOOTING MINOR PROBLEMS
In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
•
•
•
•
If water remains inside the dishwasher, check that:
•
•
•
If the dishes are not being cleaned properly, check that:
•
•
•
•
•
•
•
28
User instructions
Check that there are no deposits of sludge or rust inside the water
pipe: if there are, allow the water to run from the water supply tap for
a few minutes.
Plug the power cord back into the socket.
Reconnect the water intake hose and open the tap again.
the dishwasher is connected to the electrical power supply;
there is no power failure;
the water tap is open;
the dishwasher door is properly closed.
the drain hose is not kinked;
the drain siphon is not obstructed;
the dishwasher filters are not clogged.
the correct amount of detergent has been added;
there is regenerating salt inside the special container;
the dishes are being loaded correctly;
the selected program is suitable for the dish types and their degree
of soiling;
all the filters are clean and positioned correctly;
the spray arm nozzles are not obstructed;
there is no object obstructing the rotation of the spray arms.