Camera Settings - Vivitar VXXBR10 User Manual

Preview Screen (cont.)
This icon shows the current flash setting. Using the Flash shortcut
key opens the flash options. There are five choices for focus. Auto,
Red-eye Reduction, Forced Flash, Slow Sync, No Forced Flash. The
default is set to No forced Flash. Make sure any connected Flash
Devices are turned on before use.
This icon shows the current SD card status. There are three states:
Inserted, Not Inserted, and Write Protection. Inserted and Not
Inserted indicate if the SD card is currently inside the camera or not.
Write Protection indicates that the currently inserted SD Card is
write-protected, preventing any modifications to the card.

Camera Settings

You can make custom settings for the camera.
After the camera is turned on, press the menu button to open the menu.
The menu will start under Photo Settings. To move to Video and System
settings press the Right/Flash key.
Note: Settings differ depending on the current mode selected on the mode dial.
9