Detergents And Care; Products; Basic Operation; Switching On The Appliance - Bosch XQG100-WNC854A50W User Manual And Installation Instructions

Hide thumbs Also See for XQG100-WNC854A50W:
Table of Contents

Advertisement

en Detergents and care products
Detergents and care products
12 Detergents and care

products

You can protect your appliance and
Detergents and care products
your laundry by selecting and using
the correct detergents and care
products.
The manufacturer's instructions for
use and dosage can be found on the
packaging.
Notes
¡ When using liquid detergents, only
use liquid detergents that are self-
flowing
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Do not use products containing
solvents, caustic agents or volatile
substances
¡ Do not use chlorine bleach
¡ Do not use dyes regularly as fixing
salt can damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
¡ Do not pour vinegar into the dis-
pensers → Page 41 of the intelli-
gent dosing system

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
38
Requirement: The appliance has
been correctly installed and connec-
ted. → Page 13
Press
⁠ .
The switch-on process takes a few
seconds.
a After a few seconds, the appliance
displays the start animation and
the programme overview.
a An audible function test is carried
out.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Requirement: The display shows the
programme menu.
Search through the menu.
1.
→ Page 22
Press the required programme.
2.
→ "Programmes", Page 31
a The display shows the programme
settings.
Adjust the programme settings.
3.
→ "Buttons", Page 27
Observe the information about op-
erating logic → Page 21.
The programme settings are not
saved permanently for the pro-
gramme.
13.3 Saving programme set-
tings
Requirement: A programme is set.
→ Page 38
Press
⁠   Set as.
To call up the saved programme,
press Favourites in the pro-
gramme menu → Page 24.

Advertisement

Table of Contents
loading

Table of Contents