PHONE
Your radio allows you to place and receive
telephone calls through a repeater (depending
on phone line availability). You can edit the
phone list through your radio's menu (see page
44).
D appears on the display when you are in
•
Phone mode.
ACCESS THE REPEATER
Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access/de-access code to the repeater.
Immediate Auto – your radio will transmit the
access/deaccess code automatically upon
entering phone mode or disconnecting a
phone call. You will hear a series of tones, and
see your access/deaccess code on the
display, indicating that an access/deaccess
code is being sent automatically.
Delayed Auto – your radio will transmit the
access code upon a PTT button press. The de-
access code is sent automatically when you
exit phone mode.
Manual - Enter your access/deaccess code
using the DTMF microphone keypad.
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button (see
page 22), and skip to step 6.
– or –
1 Select a channel that has been programmed
for telephone.
J
2
to enter menu mode.
L
M
or
3
until
J
4
to select
The D appears on the display.
Note:
5
Enter your repeater access code, if necessary
(see page 41).
P H O N E
P H O N E
41
English