Advertisement
Quick Links
Ceiling VESA Mount - CVM-46
SAFETY INSTRUCTIONS
1. Entrust mounting equipment only to experienced professionals and strictly follow the provided safety instructions. Improperly
installed equipment may result in property damage, personal injury and/or liability for the installing contractor.
2. Always use safety cables! This will prevent equipment from falling during setup or while exploitation.
3. Always carefully check the mounting surface of the wall. Make sure the wall or ceiling structure allows to hold the weight of
the speaker including its bracket.
4. Only use appropriate fastening hardware.
5. Always make sure to securely use and lock all mounting bolts. Loose bolts may become unscrewed over time due to vibration
which will then create a safety hazard.
www.mnmounting.com
info@mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Assembly Guide
Assembly Guide for the
CVM-46
Advertisement
Related Manuals for Mounting Solutions CVM-46
Summary of Contents for Mounting Solutions CVM-46
- Page 1 Assembly Guide CVM-46 Assembly Guide for the Ceiling VESA Mount - CVM-46 SAFETY INSTRUCTIONS 1. Entrust mounting equipment only to experienced professionals and strictly follow the provided safety instructions. Improperly installed equipment may result in property damage, personal injury and/or liability for the installing contractor.
-
Page 2: Assembly Components
Assembly Guide CVM-46 Assembly components: Ceiling Plate - 1 pcs Top Plate - 1 pcs Upper Tube - 1 pcs Lower Tube - 1 pcs Middle Plate - 1 pcs Projector Plate - 1 pcs AWB-12- 1 pcs Сlamping Handle - 8 pcs... - Page 3 Assembly Guide CVM-46 www.mnmounting.com info@mnmounting.com 2 Merezhna str., Bila Tserkva, Kyiv region, 09100, Ukraine...
- Page 4 Assembly Guide CVM-46 Assembly Instructions: 1. Start the assembly by sliding the Upper 2. Attach the Upper Tube to the Ceiling Tube over Ceiling Plate Plate with Bolts - 4 pcs. 3. Fasten the Ceiling Plate with Upper 4. Fasten the Safety Anchor AWB-12...
- Page 5 Assembly Guide CVM-46 5. Slide the Top Plate 6. Tighten the Top Plate over the Lower to the Lower Tube Tube with Bolts - 4 pcs. 8. Tighten the Middle Plate to the Top 7. Slide the Middle Plate over the Lower Plate with Сlamping Handle...
- Page 6 Assembly Guide CVM-46 9. Insert the Lower Tube into the 10. Tighten the Lower Tube to the Upper Tube . Attention!!! For correct Upper Tube by using the Bolts installation of Tubes, the rectangular pcs, at the required height/drop. holes MUST match.
- Page 7 Assembly Guide CVM-46 13. Tighten the Projector Plate to the 14. Use a Quick Link to secure one end of Middle Plate by using the Сlamping the Safety Cable to the Safety Anchor Handle - 4 pcs. AWB-12 . Conduit the other end of the...
- Page 8 Assembly Guide CVM-46 Height Adjustment (CUT-Version): 16. The base length of the Upper Tube 17. In case a lower height/drop is required, and Lower Tube allows for height simply cut the Upper Tube and Lower along two lines: Cut Line A and adjustability: Min - 690 mm (27,17’’) to Max...