Advertisement
User instructions
PROGRAMMING
Programming operations are only possible with the door closed.
As long as the door is open, the PROGRAMS (4) lights remain off.
PROGRAM SELECTION
Press
the
PROGRAM
button (3) several times until the light of
the program required comes on.
STARTING THE PROGRAM
To start the dishwasher, press the START/PAUSE button (2) for a few
seconds, until the light of the selected program starts to flash
(confirmation beep).
The light will flash as long as the program is in progress, to indicate that
it is being performed.
END OF PROGRAM
At the end of the program the beeper
sounds briefly and the program lights 4
and 5 (marked "end") flash.
INTERRUPTION A PROGRAM
To interrupt a program in progress:
•
press the START/PAUSE button (2); the light of the program in
progress remains on (confirmation beep);
•
you may now restart the program by pressing button (2) again until it
restarts, or change or annul the program (see "C
", or "A
PROGRAM
NNULLING A PROGRAM
SELECTION
").
HANGING A
19
Advertisement
