Advertisement
General Installation
1. Unpack the refrigerator. Place masonite or similar
underneath to protect the floor – especially in the area
of the compressor back plate – and lay refrigerator on
it's back (Electrolux recommends two people should lay
refrigerator on it's back). Using a screwdriver remove
the 3 plastic hole plugs from the non hinge side.
2. Remove the top hinge cover located on top of the
refrigerator and then unscrew the three hinge screws
holding the top hinge in place. Remove the top hinge.
3. Remove the bottom hinge roller assembly. Unscrew the
2 screws holding the bottom hinge and remove it.
4. Unscrew the two screws and remove the door stop
which is located on the bottom flange of the door.
electrolux built-in refrigeration general installation 9
5. Remove non-hinge side bottom front roller.
6. Unscrew the two screws holding the black plastic
spacer and remove.
tips and information
Please retain all the items removed in steps 1 to 6 above
just in case you need to remove the refrigerator from the
cabinet sometime in the future.
7. Assemble the kit bottom mounting bracket assembly
(hinge side, part no. 4) ensuring that the thin sheet
metal spacer (part no. 12) is placed between the
bottom bracket assembly and the base of the
refrigerator, align to existing holes, place the black
spacer (part no. 13) piece with the two screws.
Advertisement
