Smeg LS9209A-3 Instruction Manual page 7

END PROGRAM
When the program finishes, a buzzer sounds
briefly and all the PHASES/PROGRAM lights
(7) flash.
Press any of the SELECTION PROGRAMS buttons (2), stops the light
flashins, and the dishwasher is now ready to perform a new cycle;
opening and shutting the door or switching the appliance off and on has
the same effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
•
press one of the SELECTION PROGRAMS buttons (2);
•
keep the button pressed until the PROGRAM PHASES lights (7)
come on (confirmation buzzer);
•
start the program (see "S
TO CHANGE A PROGRAM
To change the running program it is necessary:
• to interrupt the running program (see "I
•
select the new program;
•
start the new program (see "S
18
User instructions
TART PROGRAM
TART PROGRAM
").
NTERRUPTION OF A PROGRAM
").
");