Table of Contents
Advertisement
Step 2
Configure parameters such as channel, pre-record, ANR and record type.
After setting one HDD to be redundant disk, select the Redundancy check box to
realize video file backup. It is to save video files to different HDDs at the same time.
Once one of the HDDs is damaged, there is still a backup file in another disk to
ensure data reliability.
Select the ANR check box to enable this function. When the IPC is out of network
access, it keeps on recording and saves the records in the SD card. After the
network is recovered, IPC transmits the records during the network outage back to
the NVR device to ensure record integrity.
Step 3
Set the schedule period. It includes drawing and editing.
Drawing: Press and hold down the left button of the mouse and drag the mouse in
the time figure to draw the period.
Editing: Click
Step 4
Click Apply or OK to save the settings.
The configured record schedule can come into effect only when the auto record
function is enabled. For details to enable auto record, see User's Manual.
4.6
Playback
Select Main Menu > Playback or right-click on the preview interface and select Search. The
record search interface is displayed. See Figure 4-7.
You can play back records according to the configured record type, record time and channel.
For detailed information, see User's Manual.
Figure 4-6
Schedule
to configure the period and then click OK.
GUI Operations 12
Advertisement
Table of Contents
