Table of Contents
Advertisement
Safety and Maintenance Guidelines
Important Safety Information
The power cord is designed for use with your monitor. To use a different cord, use only a power
source and connection compatible with this monitor.
WARNING: Always connect your monitor, the computer, and other equipment to a grounded
(earthed) power outlet. To reduce the risk of electric shock or damage to your equipment, do not
disable the power cord grounding feature. The grounding plug is an important safety feature.
WARNING: For your safety, be sure that the grounded power outlet you plug the power cord into
is easily accessible to the operator and located as close to the equipment as possible. To disconnect
power from the equipment, unplug the power cord from the power outlet by grasping the plug firmly.
Never pull on the cord.
CAUTION: To protect your monitor, as well as your computer, connect all power cords for your
computer and its peripheral devices (such as a monitor, printer, or scanner) to a surge protection
device such as a power strip with surge protection or uninterruptible power supply (UPS). Not all
power strips provide surge protection; the power strips must be specifically labelled as having this
ability. Use a power strip whose manufacturer offers a damage replacement policy, so you can replace
your equipment if surge protection fails.
CAUTION: A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not
lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F
3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. An alternative flexible cord is synthetic
rubber.
Safety Precautions
■ Use only a power source and connection compatible with this monitor, as indicated on the label/
back plate of the monitor.
■ Be sure the total ampere rating of the products connected to the outlet does not exceed the current
rating of the electrical outlet, and the total ampere rating of the products connected to the power cord
does not exceed the rating of the power cord. Look on the power label to determine the ampere rating
(Amps or A) for each device.
■ Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by
grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the
cord.
■ Do not allow anything to rest on the power cord. Do not walk on the cord.
■ While using VESA mount application, the AC Inlet must face to down side. Do not face any other
position.
Maintenance Guidelines
■ To enhance the performance and extend the life of your monitor:
■ Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not
operating properly or has been dropped or damaged, contact your Lenovo authorized dealer, reseller,
or service provider.
■ Adjust only those controls that are described in the operating instructions.
■ Turn your monitor off when not in use. You can substantially increase the life expectancy of the
monitor by using a screen saver program and turning off the monitor when not in use.
■ Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.
■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked
or covered. Never push objects of any kind into cabinet slots or other openings.
v
Advertisement
Table of Contents
