Interact With Your Monitor - Lenovo 62A3UAR1US User Manual

Interact with your monitor

The monitor can be placed at different positions. The orientation of the content changes
automatically when you rotate the monitor to a different angle. To optimize the experience,
the default setting of auto rotation is on. You can turn off the auto rotation through the
setting in OSD.
You can switch your display into one of 3 user modes by rotating the display to a different
angle.
Note:
• Resolution and project mode can be memorized when M14t in stand mode or portrait
mode respectively by notebook.
• For more convenient use, please firstly rotate to the angle you need then adjust display
mode in notebook.
• Recommend users to set extend mode when M14t is in portrait mode.
• When rotating M14t, make sure the connection between M14t & attached device is
connected properly. Improper connection might cause the connection to be loose and
M14t will enter
Stand mode
Suitable for tasks that require limited interaction with the touch screen (such as displaying
graphs or PowerPoint presentations).
Portrait mode
Suitable for tasks that require little or no touch (such as viewing photos or playing videos).
Note:
In this mode, place M14t on flat surface and connect M14t with attached device through the
USB-C port on the top. Place M14t on uneven surface might cause the button on the bottom
to be mis-activated.
standby mode. You can re-connect the attached device to resume M14t.
Chapter 2.Adjusting and using your monitor 2-4