Unit Care - Technics SC-C70MK2EGK Owner's Manual

Adjusting with the Space Tune function
• You can adjust the sound quality automatically
according to the installation location (near the
wall or the corner of the room). Press and hold
[SETUP] ([-SPACE TUNE AUTO]) to start the sound
adjustment.
• The auto adjustment function is not available while
the headphone is connected.
• A test tone outputs quite big while the
measurement is in progress.
• To cancel the adjustment in the middle, press [
• When the adjustment is complete, "Success" is
displayed.
• You can also start the adjustment by pressing
and holding [
Press [
displayed.

Unit care

• Pull out the AC power supply cord from the socket
before maintenance. Clean this unit with a soft
cloth. To clean the top panel of this unit, use a soft
cloth such as cleaning cloth (optional), etc. and
wipe it horizontally along its texture.
• When dirt is heavy, wring a wet cloth tightly to
wipe the dirt, and then wipe it with a soft cloth.
• Do not use solvents including benzine, thinner,
alcohol, kitchen detergent, chemical wiper, etc.
Doing so may cause the exterior case to be
deformed or the coating to come off.
] on the unit for 5 seconds.
] again while "Space Tune (Auto)" is
13
].
(Continued)