Removing The Front Bezel - Lenovo 90JX Hardware Maintenance Manual

Step 6. To reinstall the computer cover:
a. Line up the computer cover with the chassis, and then slide it back.
b. Secure the computer cover to the chassis with the screws.

Removing the front bezel

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the front bezel:
Step 1. Remove any media from the drives, shut down the operating system, and turn off the computer and
all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to Chapter 7 "Locating
connectors, controls and components" on page 21 to locate the various connectors.
Step 4. Remove the left computer cover. Refer to "Removing the left computer cover" on page 30.
Step 5. Remove the right computer cover. Refer to "Removing the right computer cover" on page 31.
Step 6. Disconnect the LED cable from the motherboard.
Step 7. Release the three plastic tabs on the left and right sides of the front bezel
front bezel outward 2 .
1 , and then pivot the
.
Chapter 10 Replacing hardware
33