Making Corrections To Toxxt - Sharp Font Writer FW-560 Operation Manual

3 INSERTING AND EDITING TEXT IN A DOCUMENT
Making Corrections to Text
You will find that making corrections to typing errors is easy in the Word Processor. It
offers several alternative methods for correcting single characters or words.
To correct the character which is to the left of the cursor:
1. Position the cursor to the right of the character to be deleted.
2. Press (GJ.
The character will be deleted.
3. Type the correct character.
To correct the character which the cursor is on:
1. Position the cursor on the character to be deleted.
2. Press (Ctrl) + (Edit).
The character will be deleted.
3. Type the correct character.
To correct a whole word:
1. Position the cursor anywhere within the word to be corrected.
2. Press (LCtri} + (Xx).
The whole word will be deleted.
3. Type the correct word.
NOTE
It is not possible to directly type over existing words in a document. You must first
delete the unwanted characters and then type the new characters.
If you wish to delete a block of text, refer to "Deleting Text" on page 48.