Do you have a question about the PA-3100 and is the answer not in the manual?
Questions and answers
Muriel
January 16, 2025
I’m not able to rest the margins back to normal
1 comments:
Mr. Anderson
May 14, 2025
To reset the margins to normal on the Sharp PA-3100 typewriter, follow these steps:
1. Turn on the typewriter. 2. Clear the existing margins: - Hold down the `Code` key. - While holding `Code`, press the `M Rel` (Margin Release) key to release any set margins. 3. Move the carriage: - Use the space bar or backspace to move the carriage to the far left where you want the left margin. 4. Set the left margin: - Hold down the `Code` key and press the `L Mar` (Left Margin) key. 5. Move the carriage to the right where you want the right margin. 6. Set the right margin: - Hold down the `Code` key and press the `R Mar` (Right Margin) key.
The margins are now reset to the new positions. For standard or "normal" margins, set the left margin about 1 inch from the left edge and the right margin about 1 inch from the right edge of the paper.
Need help?
Do you have a question about the PA-3100 and is the answer not in the manual?
Questions and answers
I’m not able to rest the margins back to normal
To reset the margins to normal on the Sharp PA-3100 typewriter, follow these steps:
1. Turn on the typewriter.
2. Clear the existing margins:
- Hold down the `Code` key.
- While holding `Code`, press the `M Rel` (Margin Release) key to release any set margins.
3. Move the carriage:
- Use the space bar or backspace to move the carriage to the far left where you want the left margin.
4. Set the left margin:
- Hold down the `Code` key and press the `L Mar` (Left Margin) key.
5. Move the carriage to the right where you want the right margin.
6. Set the right margin:
- Hold down the `Code` key and press the `R Mar` (Right Margin) key.
The margins are now reset to the new positions. For standard or "normal" margins, set the left margin about 1 inch from the left edge and the right margin about 1 inch from the right edge of the paper.
This answer is automatically generated