Table of Contents
Advertisement
Appliance set-
Selection
tings
Pull-out system ¡ Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
¡ Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
Lighting
¡ When cooking and when the door
is opened
¡ Only when the door is opened
¡ Always off
Factory setting (may vary according to model)
1
Personalisa-
Selection
tion
Brand logo
¡ Display
¡ Do not display
Operation after
¡ Main menu
switch-on
¡ Types of heating
¡ Dishes
¡ Favourites
Elapsed cook-
¡ Do not display
ing time
¡ Display
1
Regional
¡ All
dishes
¡ European dishes
¡ British dishes
1
Dishes
¡ All
¡ No pork
¡ Kosher only
Childproof
¡ Button lock only
lock
¡ Deactivated
Automatic
¡ off
1
rapid heating
¡ On
Factory setting (may vary according to model)
1
Home Connect
16 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instructions in the
Home Connect app.
1
1
1
1
1
1
Factory set-
Selection
tings
Factory set-
¡ Restore
tings
Info
Display
Appliance in-
Display technical information about
formation
the appliance.
15.2 Changing the basic settings
1.
Press "Basic settings" in the menu.
Press the required basic settings area.
2.
Press the required basic setting.
3.
Press to select the required basic setting.
4.
a The change is applied directly for most basic set-
tings.
To change additional basic settings, use
5.
back and select a different basic setting.
To exit the basic settings, use
6.
main menu or switch off the appliance using
a The changes are saved.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
15.3 Setting the time
Press "Basic settings" in the menu.
1.
Press "Time".
2.
To set the time, press the hour display or the minute
3.
display.
a The selected value is marked in blue.
Use the setting ring to set the time.
4.
The minutes are counted in 5-minute increments.
‒
To set it to the precise minute, press and hold
the corresponding area in the setting ring for
around 1-2 seconds. The minutes are shown in
dots. Use the setting ring to set the minutes.
To exit the basic settings, use
5.
main menu or switch off the appliance using
a The time is saved.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
16.1 Setting up the Home Connect app
Install the Home Connect app on your mobile
1.
device.
Start the Home Connect app and set up access for
2.
Home Connect.
Home Connect en
to go
to go back to the
.
to go back to the
.
19
Advertisement
Table of Contents
