Technical Data; Product Drawing - ebm-papst K3G560-RA25-21 Operating Instructions Manual

K3G560-RA25-21

3. TECHNICAL DATA

3.1 Product drawing

All dimensions in mm.
1 Installed position: shaft horizontal (install support struts only vertically as illustrated) or rotor on bottom; rotor on top on request
2 Cable diameter min. 4 mm, max. 10 mm, tightening torque 4 ± 0.6 Nm
3 Tightening torque 3.5 ± 0.5 Nm
Item no. 52443-5-9970 · ENU · Change 209539 · Approved 2021-02-10 · Page 4 / 14
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions