Defrosting; Replacing The Refrigerator And Freezer Light Bulb; Transportation And Changing Of Installation Position; Changing Of Door Opening Direction - Smeg FD43PHNF2 Instruction Booklet

Defrosting

• Defrosting occurs fully automatically during
operation; the defrost water is collected by
the evaporating tray and evaporates
automatically.

Replacing The Refrigerator and Freezer Light Bulb

1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover with a
minus screw driver, and take out the
cover.(A)
3. Change the present light bulb with a new
one of not more than 15 W.(B)
4. Replace the light cover and after waiting 5
minutes plug the unit.(C)
TRANSPORTATION AND CHANGING OF
PART- 5.
INSTALLATION POSITION

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope.
The rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old installation position, all the moving objects (i.e.,
shelves, crisper...) should be taken out or fixed with bands in order to prevent the
shake.

Changing of Door Opening Direction

In case you need to change door-opening direction, please consult the domestic after
sales service.
(For some models)
UK - 11 -