Index BEFORE USING THE APPLIANCE ..............2 General warnings ......................2 Old and out-of-order fridges ..................4 Safety warnings ......................4 Installing and operating your fridge ................5 Before Using your Fridge ....................6 THE VARIOUS FUNCTION AND POSSIBILITIES ..........7 Information about New Generation Cooling Technology ..........7 Display and control panel .....................8 Operating your fridge ....................9 Super freeze mode .......................9...
PART - 1. BEFORE USING THE APPLIANCE General warnings WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Page 4
- farm houses and by clients in hotels, motels and other resi- dential type environments - bed and breakfast type environments; - catering and similar non-retail applications • If the socket does not match the refrigerator plug, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Old and out-of-order fridges • If your old fridge has a lock, break or remove the lock before discarding it, because children may get trapped inside it and may cause an accident. • Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore, take care not to harm environment when you are discarding your old fridges.
• Do not place glass bottles or beverage cans in the freezer department. Bottles or cans may explode. • Do not place explosive or flammable material in your fridge for your safety. Place drinks with higher alcohol amount vertically and by closing their necks tightly in the fridge department.
If your fridge doesn’t have a fan condenser, in other words, back side of your fridge is like below: • Install the plastic distance guide (the part with black vanes at the rear) by turning it 90° as shown in the figure to prevent the condenser from touching the wall.
PART - 2. THE VARIOUS FUNCTION AND POSSIBILITIES Information about New Generation Cooling Technology Fridges with new generation cooling technology have a different working system than static fridges. In normal fridges, humid air that enters into fridge and the water vapor that comes out from the foods, accumulates frost formation in freezer compart- ment.
Display and control panel 1. It is super freeze indicator. 2. It is freezer set value screen. 3. It is super cooling indicator. 4. It is cooler set value screen. 5. It is alarm symbol. 6. It is economy mode symbol. 7.
Operating your fridge Super freeze mode How would it be used? Press freezer set button until Super freeze symbol will be seen on the screen. Buzzer will sound beep beep. Mode will be set. During this mode: • Temperature of cooler and super cool mode may be adjusted. In this case super freeze mode continues.
the selected setting values will proceed. • Super cool and super freeze modes can be selected. Economy mode is automatically cancelled and the selected mode is activated. • Holiday mode can be selected after cancelling the economy mode. Then the selected mode is activated. •...
• If no button is pressed within 2 seconds the time will be set. • The countdown starts from the adjusted time minute by minute. • Remaining time will blink on the screen. • To cancel this mode press freezer set button for 3 seconds. Light cancelling mode When would it be used? •...
Screen saver mode How to use? • This mode will be activated when you press on mode button for 5 seconds. • If no button is pressed within 5 seconds when he mode is active, lights of the control panel will go off. •...
Freezer temperature settings • Initial temperature value for Freezer Setting Indicator is -18°C. • Press freezer set button once. • When you first push this button, the last set value will blink on screen. • Whenever you press on this button, lower temperature will be set (-16°C, -18°C, -20°C, -22°C, -24°C superfreeze).
Accessories Icematic (Making ice cubes) • Take out the ice making tray • Fill the water in level of line. • Place the ice making tray in its original position • When ice cubes are formed, twist the lever to drop off ice cubes into the icebox. Note: •...
Fresh dial When the humidity controler in the closed position, it allows fresh fruit and vegetables to be stored longer. In case of the crisper is totally full, the fresh dial is located in front of crisper, should be opened. By means of this the air in the crisper and hu- midity rate will be controlled and endurance life will be increased.
PART - 3. ARRANGING FOOD IN THE APPLIANCE Refrigerator compartment • To reduce frost build up never place liquids with unsealed containers in the fridge compartment. • Allow warn or hot food to cool down before storing. This helps reduce power consumption.
Freezer compartment • Use the freezer to store frozen foods for long periods of time and make ice cubes. • To freeze fresh food - ensure that as much of the surface of food to be frozen is in contact with the cooling surface. •...
Page 19
and pig fat. • The food in liquid form should be frozen in plastic cups and the other food should be frozen in plastic folios or bags. In some models; while loading the freezing compartment, the loading lines should not be passed. Otherwise, the door might remain open. In case that the freezing compartment door is left open, snow formation might occur in the freezing compartment.
PART - 4. CLEANING AND MAINTENANCE • Make sure to unplug the fridge before starting to clean it. • Do not wash your fridge by pouring water. • You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water.
Page 21
Replacing The Light Led (If the illumination is occured via LED strip) 1 led strip in freezer compartment and 2 led strips in cooler compartment are used to illumi- nate your appliance. Please call the service man. Note: Numbers and location of led strips may be changed according to the model. !!! Some versions may be without freezer illumination.
TRANSPORTATION AND CHANGING OF PART - 5. INSTALLATION POSITION Transportation and Changing of Installation Position • Original package and foam may be kept for re-transportation (optionally). • You should fasten your fridge with thick package, bands or strong cords and follow the instructions for transportation on the package for re-transportation.
Page 23
1. Do not freeze the foods that are thaw and use in short time period. SR – Set 2. Set the freezer value blink This caution will be temperature to colder on freezer Freezer comp. seen especially after values or set the set value Not Cold enough long term of power...
Page 24
What to do if your refrigerator does not operate; Check that; • There is no power , • The general switch in your home is disconnected , • The thermostat setting is on “1” position , • The socket is not sufficient. To check this, plug in another appliance that you know which is working into the same socket.
If the edges of fridge cabinet that the door joint contact are warm; Especially in summer (hot weather), the surfaces that the joint contact may get warmer during the operation of the compressor, this is normal. IMPORTANT NOTES: • If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting or re-plugged the unit in order not to damage the compressor.
THE PARTS OF THE APPLIANCE AND THE PART - 7. COMPARTMENTS This presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model. A. Freezer compartment B. Fridge compartment 9. Crispers 1. Freezer door shelves 10.