Table of Contents
Advertisement
Mobile App Commissioning
7 Site Creation
5 Owner Creation
5.1 Add Owner
5.2 Add Owner
12 Once loaded, press the [Select Owner] button on the top
right. Then select the Owner.
13 Press the [Next] button on the bottom right
6 Bind Devices
6.1 Add DTU
14 Press the + Add DTU button at the top
On this screen, pressing the center area where it says 'Enter
DTU-SN' to type the serial number in manually, or hit the scan
button
on the top right to scan the DTU's barcode.
15 Press [Finish]
6.1 Add Microinverters
16 Once entered, press the + Add Micro button
From here one can add the Microinverter serial number manually,
or again can press the scan button
to scan the Microinverter bar code.
17 Once all micros are scanned, press
the [Next] button on the bottom.
The app with return to the Bind Devices
screen.
18 If finished adding devices, press the
[Finish] button on the bottom right of
the screen.
10 The app will next ask for the owner information. If the owner is
new, press the + Add Owner button in the top left.
If adding to a current system, or creating a second system, press
the [Select Owner] button
11 Add Owner will ask for: Login Account, Password, Confirm
Password, and Name as required fields. It is suggested to add their
Email and Phone Number.
12 Press the [Save] button at the bottom.
to use a phone's camera
4
Advertisement
Table of Contents
