Table of Contents
Advertisement
Mobile App Commissioning Manual
3 Initial Login
3.1 App Login
1 Open the Duracell Micro Inverter app
2 Enter the [Username] and [Password] for the account or enter
the information provided by the Tech Support Agent
3 Press the [Login] button at the bottom of the screen
4 Once logged in, press the Me button
3.2 Password Change
5 Press the [Reset Password] button
Type the Original Password, the preferred New Password, and
again in the Confirm Password field.
6 Press the [Confirm] button
4 Plant Creation
4.1 Plant Information
8 Please enter this information:
Plant Name, Plant Type (residential, commercial, Large
Commercial), Capacity (kW), Time Zone, Address, Region, and
Photo uploads are optional.
Note: In the Address section, the current location map will come up. Type the
correct address unless it is provided on the bottom of the screen. Press the
confirm button on the top right. Region will ask for country, state, county, and
city.
9 Press the [Next] button at the bottom of the screen.
on the bottom right
7 Next press the Plants button
Once there, press the
on the bottom left
button in the top right
3
Advertisement
Table of Contents
