Table of Contents
Advertisement
MAINTENANCE
Installing and cleaning the dust filter
Installing the dust filter
Note:
‡
Dust filters are only supplied with some models in select region with excessive dust.
‡
Not available in North America or Europe.
‡
You may be available to purchase this in select regions. Please visit our website to see more details
regarding the accessories included.
Cleaning the dust filter
We recommend you to clean the dust filter every three months. Clean it more often if the projector is used in a
dusty environment.
Procedure:
1.
Switch off the power to the projector by pressing the
control.
2.
Disconnect the power cord.
3.
Pull the dust filter compartment downwards to remove it out from the bottom of the projector. 1
4.
Carefully remove the air filter. Then clean or replace the dust filter. 2
5.
To install the dust filter, reverse the previous steps.
2
1
button on the projector keypad or remote
1
2
43
English
Advertisement
Table of Contents
