Hitachi airhome 100 RAK-BH24PCAST Operation Manual page 8

ATTACHING THE AIR PURIFYING FILTERS
1
Open the front panel
Pull up the front panel by holding it at both sides with
●
both hands.
2
Remove the Pre-fi lter
Push upward to release the claws and pull out the
●
Pre-fi lter.
3
Attaching the air purifying fi lters
Attach the air purifying fi lters to the frame by gently
●
compress its both sides and release after insertion
into Pre-fi lter frame.
!
Do not bend the air purifying
fi lter as it may cause damage to
the structure.
Please do not smell direct from
source of fi lter.
4
Attach the Pre-fi lters
Attach the Pre-fi lters by ensuring that the surface
●
written "FRONT" is facing front.
After attaching the Pre-fi lters, push the front panel at
●
three arrow portions as shown in fi gure and close it.
NOTE
In case of removing the air purifying fi lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air purifying
●
fi lters are used. So, set the fan speed to "HIGH" when using it in this condition.
Air purifying fi lters are not washable. It is recommended to use vacuum to clean it. It can be use for 1
●
year time. Type number for this air purifying fi lter is <SPX-CFH22PM25A>. Please use this number for
ordering when you want to renew it.
Do not use detergent on the air purifying fi lter as some detergent may deteriorate the air purifying fi lter
●
electrostatic performance.
CAUTION
– 8 –