INDOOR UNIT INDICATORS
OPERATION INDICATOR
TEMPORARY SWITCH
Use this switch to start and stop when the remote controller does not work. [Use non-conductor stick (example
toothpick)]
By pressing the temporary switch, the operation is done in automatic mode.
●
When the operation is done using the temporary switch after the power source is turned off and turn on
●
again, the operation is done in automatic mode.
OPERATION LAMP
This lamp lights during operation.
The OPERATION LAMP flashes in the
following case during cooling.
(1) During POWERFUL MODE
For about 20 minutes.
TIMER LAMP
This lamp lights when the timer is working.
TEMPORARY SWITCH button
– 5 –