Maintenance And Repair - MTS Systems MSB-0410 Manual

MTS-No.: 29919

2.3 Maintenance and repair

No regular maintenance check for the Shielding Box is required.
Checking the unit has to be done by the manufacturer.
During the warranty period only the manufacturer is authorized of repairing the
modules or the assemblies.
If it is impossible to reach a correct function of inner units, test the feed through of the
interfaces of the Shielding Box by checking the continuity of the separate lines.
The interfaces have to be connected like it is described in the wiring table. If the
wiring of the Shielding Box is not carried out correctly, send the box for repair to the
manufacturer company immediately.
Attention:
29919.MANUAL / MSB-0410 / V 1.0 / 18 January 2022
MTS Systemtechnik GmbH
Gewerbepark Ost 8
D-86690 Mertingen
For maintenance or repair of the unit first switch off power a n d
remove the power cable (outside of the Shielding Box)!
Prior to maintenance or repair all connected lines have to be removed!
Phone +49 (0) 9078 / 91294 – 0
Fax +49 (0) 9078 / 91294 – 70
Page 10 from 13
© MTS Systemtechnik GmbH
www.mts-systemtechnik.de
info@mts-systemtechnik.de
DIN EN ISO 9001:2015 – certified