Yamaha FJR1300AE 2023 Owner's Manual page 30

Instrument and control functions
GEAR
4
C.TEMP
TIP
The selected information display can-
not be switched while the message
4
"Hi" is flashing.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
FUEL AVG
The average fuel consumption display
modes "km/L", "L/100km" or "MPG"
show the average fuel consumption
since the display was last reset.
 The "km/L" display shows the av-
erage distance that can be trav-
eled on 1.0 L of fuel.
 The "L/100km" display shows the
average amount of fuel necessary
to travel 100 km.
 The "MPG" display shows the av-
erage distance that can be trav-
eled on 1.0 US gal of fuel.
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
˚F
Hi
ECA10022
MPG
28.9
4-13
Push the "RESET" button briefly so
that the average fuel consumption dis-
play flashes, and then push the "RE-
SET" button again for 2 seconds while
the display is flashing.
TIP
After resetting the average fuel con-
sumption display, "_ _._" will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
NOTICE
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Instantaneous fuel consumption dis-
play:
CRNT FUEL
The instantaneous fuel consumption
display modes "km/L", "L/100km" or
"MPG" show the fuel consumption un-
der the current riding conditions.
 The "km/L" display shows the dis-
tance that can be traveled on 1.0 L
of fuel.
 The "L/100km" display shows the
amount of fuel necessary to travel
100 km.
 The "MPG" display shows the dis-
tance that can be traveled on 1.0
US gal of fuel.
TIP
If traveling at speeds under 10 km/h (6
mi/h), "_ _._" will be displayed.
ECA15474
MPG
32.3