Motorcycle care and storage
NOTICE
Improper cleaning can cause cos-
metic and mechanical damage. Do
not use:
high-pressure
steam-jet cleaners. Excessive
water pressure may cause wa-
ter seepage and deterioration of
wheel bearings, brakes, trans-
mission seals and electrical de-
vices.
detergent applications such as
those available in coin-operated
car washers.
harsh
strong acidic wheel cleaners,
especially on spoke or magne-
sium wheels.
harsh
cleaning compounds, or wax on
matte-finished parts. Brushes
can scratch and damage the
matte-finish, use soft sponge or
8
towel only.
towels, sponges, or brushes
contaminated
cleaning products or strong
chemicals such as, solvents,
gasoline, rust removers, brake
fluid, or antifreeze, etc.
Before washing
1. Park the vehicle out of direct sun-
light and allow it to cool. This will
help avoid water spots.
2. Make sure all caps, covers, elec-
trical couplers and connectors are
tightly installed.
3. Cover the muffler end with a plas-
tic bag and a strong rubber band.
washers
Avoid
high-pressure
chemicals,
including
chemicals,
abrasive
with
abrasive
4. Pre-soak stubborn stains like in-
ECA26280
sects or bird droppings with a wet
towel for a few minutes.
5. Remove road grime and oil stains
with a biodegradable degreaser
or
(YAMACLEAN Pro-Wash Spray)
and a plastic-bristle brush or
sponge. NOTICE: Do not use
degreasing agent on areas re-
quiring
seals, gaskets, and wheel axles.
Follow
[ECA26290]
Washing
1. Rinse off any degreaser and spray
down the vehicle with a garden
hose. Use only enough pressure
to do the job. Avoid spraying wa-
ter directly into the muffler, instru-
ment panel, air inlet, or other inner
areas such as underseat storage
compartments.
2. Wash the vehicle with a quality au-
tomotive-type
(YAMALUBE Wash & Wax) mixed
with cool water and a soft, clean
towel or sponge. Use an old tooth-
brush or plastic-bristle brush for
hard-to-reach places. NOTICE:
Use cold water if the vehicle has
been exposed to salt. Warm wa-
ter will increase salt's corrosive
properties.
3. For windshield-equipped vehicles:
Clean the windshield with a soft
towel or sponge dampened with
water and a pH neutral detergent.
If necessary, use a high-quality
windshield cleaner (YAMACLEAN
Glass Cleaner) or windshield pol-
ish. NOTICE: Never use any
8-2
lubrication
such
product
instructions.
detergent
[ECA26301]
as