Beko HII 64400 MT User Manual page 15

Front right cooking zone selection key
Rear right cooking zone selection key
General warnings for the control panel
• Graphics and figures are for informa-
tional purposes only. Actual displays and
functions may vary according to the
model of your hob.
• This product is controlled with a touch
control panel. Each operation you make
on your touch control panel will be con-
firmed by an audible signal.
• Always keep the control panel clean and
dry. Having damp and soiled surface may
cause problems in the functions.
Turning on the hob
1. Touch the key on the control panel.
ð "0" icon appears on all cooking zone
displays.
If no operation is performed within
20 seconds, the hob will automatic-
ally return to Standby mode.
Turning off the hob
1. Touch the key on the control panel.
ð The hob will turn off and return to
Standby mode.
"H" or "h" symbol that appears on
the cooking zone display indicates
that the cooking zone is still hot. Do
not touch cooking zones.
Residual heat indicator
"H" symbol that appears on the cooking
zone display indicates that the hob is still
hot and may be used to keep a small
amount of food warm. This symbol will
soon turn to "h" symbol meaning less hot.
When power is cut off, residual heat
indicator will not light up and does
not warn the user against hot cook-
ing zones.
Turning on the cooking zones
1. Touch key to turn on the hob.
2. Touch the selection key of the cooking
zone you want to turn on.
ð "0" symbol appears on the cooking
zone display and the related display il-
luminates more brightly.
If no operation is performed within
20 seconds, the hob will automatic-
ally return to Standby mode.
Setting the temperature level
Touch or
level between "1" and "9" or "9" and "1".
The product might start-stop when
it is operating on levels from 1 to 7,
especially with cookware with a
small diameter and when water-oil
is little. This is not a fault.
EN / 15
keys to set the temperature
EN
PL
CS
ET