Maintenance.15; General; Maintenance Summary - Snapper GT1848H Safety Instructions And Operator's Manual

Table of Contents

Advertisement

Maintenance
General
Maintaining and cleaning the tractor will keep it in prime safety and operating condition. Detailed
instructions on how to service the tractor are on the following pages. Perform the maintenance as
recommended. For future reference keep a log, provided on page 55, of when maintenance was done.
A WARNING
A
Beforo performing maintenance on the tractor, put the motion control
lever In neutral, enaure blade awitch la off, fully lower the attachment,
lock the brake, put the tranaaxle knob In "Lo" and turn off engine.
Failure to do ao could reault in peraonal Injury or even death.
Maintenance summary
The summary below shows when to service the tractor under normal conditions. The tractor's hourmeter
tells the niunber of hours the tractor has been used. Service may need to be done more frequently, especially
under imusual conditions, such as heavy dirt, dust, etc.
Check before every use...
belts
engine oil
fasteners
fuel level
guards
&
shields
transaxle oil
Change after initial 50 hours...
transaxle oil & niter
Check every 100 hours...
air cleaner (diange)
engine oil
&
filter (diange)
fuel Alter (diange)
fuel sareen (clean)
spark plugs (change)
Change after initial 250 hours, then
every 500 hours...
transaxle oil & Alter
Check during and after every use...
air cleaner
engine air intake screens
Check after first 5 hours...
battery
engine oil & Alter (change)
Attings
Check every 25 hours...
air cleaner (clean)
battery
brake
engine cooling Ans
Attings (grease)
hydraulic hoses & Attings
tire pressure

Advertisement

Table of Contents
loading

Table of Contents