Table of Contents
Advertisement
H2O iGO™ Hybrid Steam Mop Parts Diagram
1.
Curved Handle
2.
Extension Handle
3.
Safety Lid
4.
Steam Valve Dial
5.
Water Indicator Level
6.
Unit Body
7.
Mop Head
8.
Microfiber Cloth
9.
Carpet Glider
10.
Power Cord
11.
Funnel
12.
Measuring Cup
(300ml/10.14oz)
1
2
3
4
5
11
12
8
9
How to Assemble Your H2O iGO™ Hybrid Steam Mop
!
WARNING
unplugged from the electrical outlet and the Power Switch (O/I) is in
the "OFF" position (O) before assembly.
STEP 1:
Remove the unit from the box, and make sure all parts from the
diagram above are included.
STEP 2:
Attach the Curved Handle to the Extension Handle by inserting the
top end of the Extension Handle to the bottom end of the Curved Handle. Make
sure to align the button on the top end of the Extension Handle with the hole on
the bottom end of the Curved Handle so that it clicks into place.
10
STEP 3
: Attach the bottom end of the Extension Handle to the top of the Unit
Body. Make sure to align the button on the bottom end of the Extension Handle
6
with the hole on top of the Unit Body so that it clicks into place.
STEP 4
: Attach the Mop Head to the bottom part of the Unit Body. Make sure
that the Unit Body and Mop Head are facing the same way so that they can be
secured to each other properly. The Mop Head will click into place.
7
9
Make sure that the H2O iGO™ Hybrid Steam Mop is
10
Advertisement
Table of Contents
